Description

"Instructions:

Bluetooth EKG 24 hour real-time ECG monitoring ultra-thin ECG patch Portable recorder Wearable wireless personal ECG monitor

An electrocardiogram can be formed after the heart rate is pasted on the leads. An electrocardiogram is used as a test to help diagnose heart disease. Such as: rhythm type: atrial heart rate or junctional heart rate; arrhythmia, including the nature of premature beats: atrial premature beats, ventricular premature beats, or junctional premature beats; pre-excitation syndrome; atrial or ventricular hypertrophy; cardiac conduction abnormalities; myocardial ischemia or Myocardial infarction, and whether there is insufficient blood supply to the heart, etc.

Application:It is an intelligent auxiliary product that records heart rate data in real time after connecting to the Bluetooth of the mobile phone to form an electrocardiogram to assist in the diagnosis of heart disease

Features:

1. The device is a waterproof adhesive single-lead ECG recorder.

2. Easy to carry, can be worn on the chest during measurement, easy to operate.

3. The wearing time can be up to 24 hours, effectively monitoring and recording ECG and heart rate.

4. Wireless data transmission: support Bluetooth wireless transmission.

5. You can use the recorder to detect/display your ECG data at any time, and you can record and save the data.

6. Standard large-capacity charging box, easy to store and charge.

Technical Specification:

1. Heart rate measurement range：Heart rate measurement range; 30bpm~300bpm; The error should be ±2%or±2bpm, whichever is greater

2. Standard sensitivity：10mm/mV, error<±10%;

3. Work indicator：Switch machine: press and hold for 3s to power on Lead connection: The blue light flashes once every 1 second and stops flashing after 1 minute Lead not connected: blue light is always on Low power prompt shutdown: the yellow light will automatically shut down after 30 seconds Bluetooth not connected: no indicator display;APP display Bluetooth connection is normal: no indicator light display; APP display Charging: the indicator light is always on in blue Fully charged: steady green light

4. Product performance：Sampling rate: 250Hz; Internal noise: <25μV (peak-valley);Input impedance > 50MΩ;common mode rejection ratio > 100dB; Frequency response: 0.5Hz ~ 40Hz;

5. Wireless bluetooth：Bluetooth 4.2 Low Energy (BLE) protocol

6. battery life：Shutdown power consumption is less than 15uA Continuous ECG detection for >50 hours;

7. Mobile APP Operating SystemAndroid 5.0 and above

8. Power supplyBattery: 3.7V rechargeable polymer battery, 70mAh; Power: about 5mW; Charging method: special safety charging base

9. Data transmission：Real-time transmission of measurement data to terminal equipment via Bluetooth

10. Working conditions：Ambient temperature: 5℃~40℃; Relative humidity: 10%~95%; Atmospheric pressure range: 86kPa~106kPa;

Physical Identity:

Product Size:9*3.5*1cm

Product Weight:0.2kg，

Package Size:11*17*6cm

Package Weight:0.35kg

Package included:

1X ECG Recorder

1X Charging cable

1X Charging box

10X ECG Sticky Patch

1X User Manual"