【Read and Clear Codes】CDL20 obd2 scanner for car built in fault codes definition lookup library. You can use vehicle code reader capable of scanning vehicle Diagnostic Trouble Codes (DTCs) in seconds, fast read and clear trouble codes. If you finished repairing the faulty components, then clear the fault codes, it is surprise that you turn off the check engine light.

【Smog Check】CLD20 code reader built-in I/M monitor readiness function. You can use this obd2 scanner to check the status of emission-related monitors, such as MIL, fuel system, misfire, catalyst. Make sure the monitor was sett, help your car ready pass the annual smog check. Save money!

【User-friendly Design】U MUCAR CDL20 is a compact portable pocket car scanner, the size is 4.33 x 2.58 x 0.78 inches. The car diagnostic tool has a 1.77-inch display , featuring a clear display TFT screen (128 x 160 pixels). No need to install the mobile app or software; no need any batteries or chargers. In daily work or travel, plug and play, you can quickly look up the VIN and car codes once connected to the vehicle via the OBDII cable .

【Wide Compatibility】U MUCAR CDL20 scanner for car work with most 1996 US-Based, 2000 EU-Based and 2008 Asian-Based cars that are OBDII compliant (OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). Including 12-volt sedans, SUVs, light duty trucks, mini vans, hybrids and etc. Supports English, French, Spanish, German, Russian, Italian, Portuguese and Polish.Check compatibility with your vehicle model before purchasing.

Warm Tips

3) The supported data stream depends on the OBDII system installed by the manufacturer.

4) It is a engine code reader, it DOESN’T support other systems such as ABS, SRS, transmission and others.

5) It is not suitable for new energy or hybrid vehicles.

Support Vehicle Coverage

MUCAR CDL20 is compatible with most American, European, and Asian models manufactured as from 1996. It supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). If you don’t know your car OBD2 protocols that you could check your car OBD2 connector whether 16 Pin. If yes. This goods support to your car. Please take attention. This goods just check for your car engine.

American Car list

Need standard obd2 and release year from 1996-now

For Chrysler, Ford, GM, Jeep, Lincoln, Buick, Cadillac, Chevrolet, Dodge, HM, ect…

European car list

Need standard obd2 and release year from 2000-now

For Mercedes Benz, Smart, Sprinter, BMW, Volkswagen, Skoda, Audi, Opel, Lamborghini, Porsche, Maybach, Ford, Land Rover, Jaguar, Aston Martin, Bentley, Rolls-Royce, Rover, Mini, Vauxhall, DR, Ferrari, Fiat, Abarth, Lancia, Alfa Romeo, Maserati, Bugatti, Peugeot, Citroen, Renault, Saab, Volvo, GM, GMSA, Dacia ,Seat, ect …

Japanese / Korean car list

Need standard obd2 and release year from 2008-now

For Honda, Acura, Toyota, Scion, Lexus, Mazda, Nissan, Infiniti, Isuzu, Daihatsu, Suzuki, Mitsubishi, Subaru, Samsung, Daewoo, Hyundai , Kia, ect …

Chinese car list

Need standard obd2 , and release year from 2014 -now

For Great Wall, Huachen, Geely, DF Honda ,Lifan, ect …

Support 9 languages

Support English,French,Spanish,German,Russian,Italian,Portuguese,Japanese,Polish

Full OBD2 Diagnostic Functions

Featuring 10 modes of OBD2 tests, MUCAR CDL20 can be compatible with most OBDII protocol compliant cars to read and clear emission codes, show live data, O2 sensor test, On-Board monitor test, component test and view vehicle information etc.

1) Read extensive current, pending and permanent codes in OBD system quickly

2) Clear detected fault codes and turn off the Check Engine Light efficiently

3) View Freeze Frame Data

4) View graphical live data of vehicle’s computer module(s) for easy analyses

5) View the vehicle’s operating parameters at the moment a DTC is detected

6) Read I/M readiness status to have a vehicle inspected for state emissions compliance

7) Perform O2 sensor test to check fuel efficiency and vehicle emissions

8) Read the results of on-board diagnostic monitoring tests for specific components/systems

9) Retrieve the vehicle information of VIN, CINs, and CVNs completely

10) Perform the component Test by allowing initiating a leak test for the vehicle’s EVAP system

Clear Check Engine Light

MUCAR CDL20 enables you to clear the engine warning light, after completing the full obd2 diagnostics with ease. The main purpose of this tool is to:

-Scan the engine systems;
-Tell you about the nature of the issue; -Give an accurate reason why the engine check light is on;
-Help to detect any potential problems;
-Avoid excessive costs for unnecessary repairs. -The warning light does not turn off till you fix the issue.

Pass Emission Test Smoothly：

With this scan tool, you don’t have to drive around endlessly, continuously coming back to the repair shop for the retest. You can do a quick check of the vehicle, to determine if it is ready to pass the emission test.

I/M Readiness

Check the readiness of the monitoring system. It is an excellent function to use prior to having a vehicle inspected for compliance to a state emissions program.

O2 Sensor Test

Retrieve O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. -On-Board Monitor View the results of On-Board Monitor tests. The tests are useful after servicing or after erasing a vehicle’s control module memory.

On-Board Monitor

View the results of On-Board Monitor tests. The tests are useful after servicing or after erasing a vehicle’s control module memory.

Get Effective Diagnostic Result

Your repair work can be done in a short time by using MUCAR CDL20 as follows:

Vehicle Information

Display the vehicle identification number (VIN), the calibration identification (CIN), and the calibration verification number (CVN), and other information of the test vehicle.

EVAP Test

Mode $08 command tells your car to start a test of the “evaporative emission control system”, to prevent fuel from evaporating out of your tank and contributing to smog. By this way, you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically

Freeze Frame Data

Snapshot the precise conditions of the car when a fault code triggers the check engine light, to help identify the problem.

Live Data Stream

Display the real time PID data from ECU (as analog inputs and outputs, digital inputs and outputs, and system status information broadcast on the vehicle data stream) The live data produced is accurate and tells you exactly what you require to know about your vehicle

DTC lookup

Every code in MUCAR CDL20 comes with a description to aid technicians in efficient vehicle diagnostics and repair. This will save you the trouble of having to go online to look for the meaning of a diagnostic trouble code. And you can also simply click on the error code selected so as to get an in-depth definition.

Other User-Friendly Features

1)【Plug & Play】 You just need to connect the diagnostic cable into the vehicle’s DLC socket, and the code reader gets the power directly from the vehicle.

2)【Easy-to-use Keypad 】The reader has 4 button keypad buttons that make the menu super easy to scroll. MUCAR CDL20 users can operate up and down, press OK or use the enter button pretty easily, with a solid and effective touch to their delight.

3)【Compact Design 】The reader has a compact ergonomic design which makes it fit in the palm quite comfortably, especially made for people who don’t want bulky devices.

Warranty service

There is 12 months free warranty from the date of purchase. For any question or problem with this tool, please contact us for help directly and we will feed back to you within 24 hours.

Packing List

1* Mucar CDL20 Code Reader

1* User Manual